Tools Featured in this Teardown

This teardown is not a repair guide. To repair your Motorola California Mobile Phone, use our service manual.

  1. Remove the battery by sliding it down the rails to which it is connected.
    • Remove the battery by sliding it down the rails to which it is connected.

    Add Comment

  2. Find a flat head or Phillips head screwdriver.
    • Find a flat head or Phillips head screwdriver.

    • Insert the screwdriver into the holes in the plastic rod connecting the key pad guard to the rear casing.

    • Use the screwdriver to push the rods towards each other until they click out of their locked position.

    • Note: This may require a large amount of force.

    Add Comment

    • Slide off the antenna guard and locate the four clips on the exterior of the rear casing.

    • Simultaneously push the clips outward while lifting the rear casing and keyguard away from the front casing.

    • Remove the key guard from the rear casing by taking it out of its position.

    Add Comment

    • Locate and unplug the black component of the antenna from the motherboard.

    • Under the black component should be a blue component. Unscrew this component in order to free the antenna.

    Add Comment

    • Slide the antenna out of the green tubing and slide the green tubing out of it's corresponding hole on the motherboard.

    Add Comment

    • Lift the motherboard out of its location in the front casing.

    • Do this slowly and gently so that none of the motherboard's components are damaged.

    Add Comment

Andrew Lam

Member since: 04/17/2012

28 Reputation

4 Guides authored

Team

Cal Poly, Team 9-46, Regan Spring 2012 Member of Cal Poly, Team 9-46, Regan Spring 2012

CPSU-REGAN-S12S9G46

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 7,060