Tools Featured in this Teardown

Introduction

The body of the guitar holds most of the main components and motherboards.

This teardown is not a repair guide. To repair your Les Paul Wireless Guitar, use our service manual.

  1. Remove batteries
    • Remove batteries

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  3. Remove void warranty sticker The sticker is covering a torx screw
    • Remove void warranty sticker

      • The sticker is covering a torx screw

  4. Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long. Push level, this will detach the back of the guitar from the front. Carefully remove the back of the body
    • Unscrew the 11 screws securing the back of the body using a T10 Torx screwdriver. Each screw is 1 cm long.

    • Push level, this will detach the back of the guitar from the front.

    • Carefully remove the back of the body

      • The battery pack cord is attached to both sides of the guitar, be careful not to tear it apart.

      • The neck connector may be stuck to the back so be sure to detach it before fully pulling

Chris

Member since: 10/18/2013

752 Reputation

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 3

Past 7 Days: 20

Past 30 Days: 81

All Time: 4,379