Fix Your Stuff Community Store

JBL Clip 1 Teardown

Written By: Timothy McEvoy (and one other contributor)
Published: May 6, 2019
  • Comments: 0
  • Favorites: 3
  • Views: 4.6k

JBL Clip 1 Teardown

Written By: Timothy McEvoy (and one other contributor)
Published: May 6, 2019
  • Comments: 0
  • Favorites: 3
  • Views: 4.6k

Teardown

Introduction

Today we will be tearing down the JBL Clip 1 and looking at its components

What you need

This teardown is not a repair guide. To repair your JBL Clip 1, use our service manual.

  1. JBL Clip 1 Teardown, JBL Clip 1 Teardown: step 1, image 1 of 2 JBL Clip 1 Teardown, JBL Clip 1 Teardown: step 1, image 2 of 2

    • Starting with the main side of the speaker, turn it over so that the back side is visible.

    Edit

  2. JBL Clip 1 Teardown: step 2, image 1 of 2 JBL Clip 1 Teardown: step 2, image 2 of 2

    • Pull off the rubber ring on the underside of the speaker so that the screws are visible.

    • Unscrew the small phillips screws.

    Edit

  3. JBL Clip 1 Teardown: step 3, image 1 of 1

    • Firmly pull the back cover off of the device.

    • Begin to unscrew the screws holding the front of the speaker in place.

    Edit

  5. JBL Clip 1 Teardown: step 4, image 1 of 3 JBL Clip 1 Teardown: step 4, image 2 of 3 JBL Clip 1 Teardown: step 4, image 3 of 3

    • After unscrewing the 3 screws on the inside turn the speaker over so that the front is placing you.

    • Using a prying tool, pull up on the rim of the speaker front.

    Edit

  6. JBL Clip 1 Teardown: step 5, image 1 of 2 JBL Clip 1 Teardown: step 5, image 2 of 2

    • Pull up to reveal the other side of the speaker chip and the speaker component itself.

    • Be careful of the wire connecting the speaker to the board as too much pressure may cause it to snap.

    Edit

  7. JBL Clip 1 Teardown: step 6, image 1 of 2 JBL Clip 1 Teardown: step 6, image 2 of 2

    • Unscrew the speaker connecting to the front piece of plastic.

    • Pull the speaker off of the front piece.

    Edit

  8. JBL Clip 1 Teardown: step 7, image 1 of 3 JBL Clip 1 Teardown: step 7, image 2 of 3 JBL Clip 1 Teardown: step 7, image 3 of 3

    • Teardown is fully finished. There are only 5 main seperate components to the speaker!

    Edit

Author

with 1 other contributor

Timothy McEvoy

Member since: 01/21/18

1,102 Reputation

2 Guides authored

Badges: 18

+15 more badges

Team

Master Techs Member of Master Techs

Community

321 Members

1,468 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 13

Past 30 Days: 41

All Time: 4,671