Fix Your Stuff Community Store

Flatron E2742 Monitor Teardown

Written By: Michael M (and one other contributor)
Published: December 1, 2023
  • Comments: 0
  • Favorites: 0
  • Views: 152

Flatron E2742 Monitor Teardown

Written By: Michael M (and one other contributor)
Published: December 1, 2023
  • Comments: 0
  • Favorites: 0
  • Views: 152

Teardown

Introduction

Needed to get this monitor open to do some tinkering.

This teardown is not a repair guide. To repair your Flatron E2742 Monitor, use our service manual.

  1. Flatron E2742 Monitor Teardown, Removing the back: step 1, image 1 of 3 Flatron E2742 Monitor Teardown, Removing the back: step 1, image 2 of 3 Flatron E2742 Monitor Teardown, Removing the back: step 1, image 3 of 3

    • 1 - Remove the three screws on the back

    • 2 - Slip iFixit Opening Pick between the back and front.

    • 3 - use an iFixit Opening Tool to pry the halves apart. Work your way slowly around moving the pick until it stops and then prying with the Opening Tool.

    Edit

  2. Flatron E2742 Monitor Teardown: step 2, image 1 of 3 Flatron E2742 Monitor Teardown: step 2, image 2 of 3 Flatron E2742 Monitor Teardown: step 2, image 3 of 3

    • There are 3 connections and 6 screws that need to be removed.

    • The top connection needs to removed before you can pull off the white tape. Squeeze the tabs in and pull down.

    • Pry up the clip locks up before pulling out.

    Edit

  4. Flatron E2742 Monitor Teardown: step 3, image 1 of 1

    • There are several clips holding the front shroud on.

    Edit

  5. Flatron E2742 Monitor Teardown: step 4, image 1 of 2 Flatron E2742 Monitor Teardown: step 4, image 2 of 2

    • Remove the 2 screws and pry the sheet metal past the black tabs to separate the LDC module.

    Edit

Author

with 1 other contributor

Michael M

Member since: 12/01/23

109 Reputation

1 Guide authored

Badges: 0

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 12

All Time: 152