This teardown is not a repair guide. To repair your Clevo Sager Eurocom P650RG G, use our service manual.

Image 1/1:
  • Not a full teardown; just board photos (both sides) and things that I couldn't find on the Internet easily.

Add Comment

Image 1/1:
  • Internal battery, 60Wh

Add Comment

Image 1/2: The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures. Image 2/2: The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures.
  • Top assembly. Screen is attached to top case.

  • The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures.

Add Comment

Image 1/1: Copper heatsink with heat pads for the CPU and GPU voltage regulator MOSFET/inductors. During reassembly, make sure no wires cover the MOSFETs
  • The copper heatsink is screwed onto the bottom cover. The CPU fan draws air through this area (not a lot though).

  • Copper heatsink with heat pads for the CPU and GPU voltage regulator MOSFET/inductors. During reassembly, make sure no wires cover the MOSFETs

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Board Photos bottom side

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here.

Add Comment

Larry Chen

Member since: 04/22/2013

752 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 19

Past 30 Days: 79

All Time: 1,180