Skip to main content

What you need

This teardown is not a repair guide. To repair your Car and Drivers Auto HandHeld Vacuum Bagless, use our service manual.

  1. Car and Drivers Auto HandHeld Vacuum Bagless Teardown, Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 1, image 1 of 3 Car and Drivers Auto HandHeld Vacuum Bagless Teardown, Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 1, image 2 of 3 Car and Drivers Auto HandHeld Vacuum Bagless Teardown, Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 1, image 3 of 3
    • Locate the four screws locate outer gray shelll

    • ''I REMOVED THE SCREWS WITH PH #OO SCREWDRIVER FROM (IFIXIT)

    • New PLace four screws to the side

  2. Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 2, image 1 of 1
    • Here are the four screws from vacuum

  3. Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 3, image 1 of 3 Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 3, image 2 of 3 Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 3, image 3 of 3
    • Remove the top grey shell of the vacuum

    • Place a red tab to the side

    • Let start looking at the 9volt motor with wire and on/off switch.

    • I remove the outer shell . I remove the motor and wires and on/off switch.

  4. Car and Drivers Auto HandHeld Vacuum Bagless Teardown: step 4, image 1 of 1
    • This it complete teardown on Car and Driver HandHeld Vacuum bagless!

kempc8

Member since: 11/22/13

899 Reputation

7 Guides authored

Team

K and K Fixit Member of K and K Fixit

Business

1 Member

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 11

All Time: 1,015