Tools Featured in this Teardown

Introduction

This thing landed in our laps. We tried it, tested it, and then ripped it apart! All information can be found at www.phonewreck.com.

This teardown is not a repair guide. To repair your BlackBerry Presenter, use our service manual.

Image 1/3: ~$200 Image 2/3: Solid Design Image 3/3: A clever design trick,the Power Button is the Blackberry Logo
  • The BlackBerry Presenter

    • ~$200

    • Solid Design

    • A clever design trick,the Power Button is the Blackberry Logo

Add Comment

Image 1/1: VGA Port
  • Moving around the back, we see all of the ports

  • VGA Port

  • S Video Port

  • Micro Usb

  • NTSC/PAl Switch

VGA Port

S video Port

Micro Usb

laa2004 - Reply

Image 1/1:
  • Peel back the Rubber pad on the bottom of the device.

Add Comment

Image 1/2: Remove the four screws. The top portion of the device should lift free, pretty easily. Image 2/2: Remove the four screws. The top portion of the device should lift free, pretty easily.
  • Grab your T7 and poke it through the adhesive pad.

    • Remove the four screws. The top portion of the device should lift free, pretty easily.

Add Comment

Image 1/1:
  • There's the PCB! Now to get under it..

Add Comment

Image 1/1:
  • Grab a small wrench or a pair of pliers and remove the screws holding in the VGA port.

Add Comment

Image 1/2: TI TMS320 DM350ZWX Image 2/2: ST microelectronics
  • Focus Enchancments : FS455LF 0731 kox4h00 is a TV encoder designed for applications which require Component Video, VGA, or RGB output capabilities.It can accept digital video or computer graphics in many different resolutions and rates, and convert them to high quality analog video.

  • TI TMS320 DM350ZWX

  • ST microelectronics

Add Comment

drwreck

Member since: 11/11/2009

1,398 Reputation

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 5,628