Fix Your Stuff Community Store

Anker Soundcore A3102 Partial Teardown

Written By: Daniel Bui (and one other contributor)
Published: November 24, 2018
  • Comments: 1
  • Favorites: 1
  • Views: 10.1k

Anker Soundcore A3102 Partial Teardown

Written By: Daniel Bui (and one other contributor)
Published: November 24, 2018
  • Comments: 1
  • Favorites: 1
  • Views: 10.1k

Teardown

What you need

This teardown is not a repair guide. To repair your Anker Soundcore A3102, use our service manual.

  1. Anker Soundcore A3102 Partial Teardown, Anker Soundcore A3102 Partial Teardown: step 1, image 1 of 2 Anker Soundcore A3102 Partial Teardown, Anker Soundcore A3102 Partial Teardown: step 1, image 2 of 2

    • Insert metal spudger between metal grill and rubber.

    • Pry the grill off.

    • Grill is held on with adhesive.

    Edit

  3. Anker Soundcore A3102 Partial Teardown: step 2, image 1 of 1

    • Unscrew 8 screws using a size 1 phillips head screwdriver.

    • Screws may be difficult to remove.

    • 4 screws are around each audio driver, totaling 8.

    Edit

  4. Anker Soundcore A3102 Partial Teardown: step 3, image 1 of 3 Anker Soundcore A3102 Partial Teardown: step 3, image 2 of 3 Anker Soundcore A3102 Partial Teardown: step 3, image 3 of 3

    • Using the same prying method in Step 1, remove the plastic holder for the two speakers.

    • Carefully lift up and away from the rest of the device.

    • There are speaker wires that permanently connect the audio drives to the board.

    Edit

Attached Documents

Author

with 1 other contributor

Daniel Bui

Member since: 02/29/16

115 Reputation

1 Guide authored

Badges: 1

One Comment

Where can i buy a replacement motherboard for this speaker i have one that i want to repair

Belle - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 9

Past 30 Days: 86

All Time: 10,120