Tools Featured in this Teardown

Introduction

The bike light in this guide is sold under various brand names, but in fact is a no-name brand and comes with no distinct markings on the packaging. Some uses for this guide are dead batteries or a broken clip.

This teardown is not a repair guide. To repair your 5 LED 6 Mode Rear Bike Light, use our service manual.

Obtain the necessary tools
  • Obtain the necessary tools

Add Comment

Insert coin or any flat object into edge of light cover Pry open until cover loosens
  • Insert coin or any flat object into edge of light cover

  • Pry open until cover loosens

Add Comment

Remove the single Phillips #00 screw holding the circuit board in place Remove both AAA batteries
  • Remove the single Phillips #00 screw holding the circuit board in place

  • Remove both AAA batteries

Add Comment

Remove both Phillips #00 screws holding the clip in place Remove the clip with a flat object
  • Remove both Phillips #00 screws holding the clip in place

  • Remove the clip with a flat object

    • The button will fall out when removing the clip. Do not lose it!

Add Comment

Congratulations! You completed your device teardown!
  • Congratulations! You completed your device teardown!

Add Comment

Alex Sireci

Member since: 09/30/2013

71 Reputation

2 Guides authored

Team

Cal Poly, Team 14-8, Forte Fall 2013 Member of Cal Poly, Team 14-8, Forte Fall 2013

CPSU-FORTE-F13S14G8

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 8

All Time: 742