iPad 2nd Gen Parts
Choose your model of iPad 2nd Gen:
iPad 2/3/4 Display Bezel
Replace the plastic black or white trim bezel at the outer edges of the front panel glass. This part is compatible with an iPad 2, 3, or 4.
iPad 2 Wi-Fi (EMC 2415) Rear Panel
This is the rear aluminum panel for model A1395 iPad 2 Wi-Fi EMC 2415.
iPad 2 Wi-Fi (EMC 2415) Blank Rear Case
This blank rear aluminum panel fits model A1395 iPad 2 EMC 2415.
iPad 2 Rear Camera Enclosure
This is the plastic enclosure for the rear facing camera.
iPad 2 Rear Camera Retaining Bracket
This metal retaining clip bracket and thermal pad fit over the rear facing camera.
iPad 2 Front Camera Bezel
Replace the metal camera bracket on the inside of an iPad 2nd generation front panel.
As the second device in the iPad line, the iPad 2 gained a faster dual core A5 processor, a lighter build structure, and was the first iPad to feature VGA front-facing and 720p rear-facing cameras designed for FaceTime video calling. The second generation iPad device has a 9.7” touchscreen display with 1024x768 pixel resolution and 132 ppi, and is equipped with either 16, 32, or 64GB of solid-state memory for program and data management.
There are four models of the second generation iPad. The Wi-Fi (EMC 2415), GSM, and CDMA were released in the United States on March 11, 2011, followed by the Wi-Fi (EMC 2560) in March of 2012, which is only available in the 16 GB capacity. This generation of iPad was the first to incorporate compatibility with the CDMA network.
The 32 and 64 GB models were discontinued on March 7, 2012, upon the introduction of the third generation iPad. The 16 GB Wi-Fi and 16 GB Wi-Fi + 3G models were discontinued on March 18, 2014.
Select your model above for parts, guides and more.