iPad 2nd Gen
Choose your model of iPad 2nd Gen:
iPad 2 Front Camera Bezel
Replace the metal camera bracket on the inside of an iPad 2nd generation front panel.
SIM Card Eject Tool
Safely eject the SIM card from Apple GSM/LTE devices (iPhones and iPads) and other electronic devices.
iPad 2 Display Data FPC Connector
Replace the LCD data connector on the logic board of a 2nd generation iPad. This part requires microsoldering.
iPad 2/3/4 Digitizer ZIF Connector
Replace the a digitizer cable connector on the logic board of a 2nd, 3rd, or 4th generation iPad. The digitizer cable is inserted into two of these connectors on the logi...
iPad 2/3 U2 IC
Replace a U2 IC on the logic board of a 2nd or 3rd generation iPad. This part requires microsoldering.
iPad 2/3/4 and mini Backlight Diode
Replace the backlight diode on the logic board of an iPad 2, 3, 4, or 1st generation iPad mini. This part requires micro soldering.
iPad 2/3/4 and mini Backlight Filter
Replace the backlight filter on the logic board of an iPad 2, 3, 4, or 1st generation iPad mini. This part requires micro soldering.
iPad 2 Rear Camera Retaining Bracket
This metal retaining clip bracket and thermal pad fit over the rear facing camera.
iPad 2 Rear Camera Enclosure
This is the plastic enclosure for the rear facing camera.
iPad 2/3/4 Home Button with Spring
This is the external button face with attached spring.
The iPad 2 was released March 11, 2011. This model comes in Wi-Fi or Wi-Fi with 3G, which is offered through AT&T or Verizon in the United States. Data service can be purchased monthly, and does not require a long-term contract. Changes from the first iPad include the new A5 processor as well as a front-facing and a rear-facing camera. This iPad model was offered in 16, 32, or 64 GB capacities with color options of white or black.
In March 2012 Apple began shipping a new version of the iPad 2 Wi-Fi available only in the 16 GB capacity. Externally, the new model can be identified by the EMC number located on the back of the iPad.