1. Start by unlocking the right locking latch.
    • Start by unlocking the right locking latch.

    • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

    Add Comment

  2. Begin by spotting the dummy memory card.
    • Begin by spotting the dummy memory card.

    • Then, remove it and put it on your workplan.

    Add Comment

    • Locate the 15 screws that hold the bottom cover of the device in place.

    • Unscrew them and place them on your work surface.

    • Then, un-clip the bottom cover, starting with the side shown in the third picture.

    Add Comment

    • In order to remove the LCD screen, you must remove the connection cables from the Wi-Fi chipset.

    • Then locate the two connectors on the LCD screen.

    • Disconnect the first connector.

    Add Comment

    • Peel off the tape from the second connector.

    • Then disconnect the second connector.

    • Locate the SSD M.2 drive.

    Add Comment

    • Then dismount this disk because it must release the connection cables of the Wi-Fi chipset.

    • Free Wi-Fi connection cables now

    • Now locate the two screws that secure the screen to the rest of the Laptop (fan side)

    Add Comment

    • Now locate the two screws that secure the screen to the rest of the Laptop (the other side).

    • Then lift the Laptop as shown in the second image of this step.

    • Unscrew the first screw.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Then unscrew the second screw.

    • Rest the Laptop as shown in the second image of this step and unscrew the third screw.

    • Then the fourth screw.

    Add Comment

    • With the four screws unscrewed, separate the screen from the rest of the Laptop. Note that the hinge remains attached to the screen.

    • On the screen near the hinge now locate the two caches screws on the left.

    • Then look for those on the right.

    Add Comment

    • Now remove the screw covers near the left hinge.

    • first on the right side of the hinge.

    • then on the left side.

    Add Comment

    • Repeat near the right hinge

    • .Now return to the hinge on the left side and unscrew the outer screw.

    Add Comment

    • Then unscrew the inner screw.

    • Repeat on the side of the right hinge.

    Add Comment

    • You can now gently unclip the screen cover.

    • Locate the left hinge screw cover.

    • Locate the right hinge screw cover.

    Add Comment

    • Gently remove the screw cover on the left hinge.

    • Also remove the screw cover on the right hinge.

    • Once the screw caps are removed you will see the fixing screws.

    Add Comment

    • Now unscrew the screw on the left hinge.

    • Then unscrew the screw on the right hinge.

    • Once this is done you can now remove the hinge cover (left).

    Add Comment

    • Left hinged cover removed.

    • Then remove the cover from the right hinge.

    • Right hinge cover removed.

    Add Comment

    • once these operations are done you see the LCD screen ready to be dismounted.

    • Now locate the screws that secure the LCD screen to the bracket and unscrew them. Two on the left.

    • Two on the right.

    Add Comment

    • Once the screws are unscrewed, lift the LCD screen gently and flip it over.

    • You will then see the connection cable of the screen.

    • Locate its connector.

    Add Comment

    • Disconnect the cable.

    • And here you can now put it on your work plan.

    Add Comment

Conclusion

To reassemble your device, Follow these instructions in reverse order.

One other person completed this guide.

Special thanks to these translators:

100%

irlanda is helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/2013

14,490 Reputation

150 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 14

All Time: 133