Parts

No parts required.

  1. Start by unlocking the right locking latch.
    • Start by unlocking the right locking latch.

    • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

    Add Comment

  2. Begin by spotting the dummy memory card.
    • Begin by spotting the dummy memory card.

    • Then, remove it and put it on your workplan.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Locate the 15 screws that hold the bottom cover of the device in place.

    • Unscrew them and place them on your work surface.

    • Then, un-clip the bottom cover, starting with the side shown in the third picture.

    Add Comment

    • Unscrew the circled screws in green and red

    • Put the computer in the position of the second image while pushing a paper clip into the hole of the screw circled in green until you hear a click

    • Lift the keyboard

    Add Comment

    • Disconnect the connector circled in red in the direction of the arrow

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/2013

14,412 Reputation

149 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 6

All Time: 79