Parts

No parts required.

Use flat side of the spudger to get under battery and use pressure to release from glue. Do this all the way around battery until it comes off. At this point do not attempt to fully remove the battery as it is still attached to the logic board. At this point do not attempt to fully remove the battery as it is still attached to the logic board.
  • Use flat side of the spudger to get under battery and use pressure to release from glue. Do this all the way around battery until it comes off.

  • At this point do not attempt to fully remove the battery as it is still attached to the logic board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Robert Clark

Member since: 01/21/2015

951 Reputation

7 Guides authored

Team

USF Tampa, Team 5-4, Brown Winter 2015 Member of USF Tampa, Team 5-4, Brown Winter 2015

USFT-BROWN-W15S5G4

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 127