iRobot Roomba 880 Error Code 6 Fix
Hector Mayorga and
Last updated on Apr 17, 2018
Views: 7.2K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 32
- Past 30 Days:
- 136
- All Time:
- 7,226
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓Error code 6 was driving me crazy. The roomba would not move and keep saying Error Code 6, move roomba to new location. After a few days of troubleshooting, the solution was:
1: firmly press on the front top of the roomba, above the front wheel. This will adjust the front wheel back into place and not send a signal that it is on a cliff.
-
-
-
Error code 6 was driving me crazy. The roomba would not move and keep saying Error Code 6, move roomba to new location. After a few days of troubleshooting, the solution was: 1: firmly press on the front top of the roomba, above the front wheel. This will adjust the front wheel back into place and not send a signal that it is on a cliff.
Ask FixBot
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
1 Guide Comment
I was also facing an error in Roomba and it was like error 2 I googled to get the solution and found something online called Roomba Error 2. Now looking here for a solution for error 6.
