Parts

No parts required.

Introduction

If your iRobot Roomba 860 Battery needs replacement or to safely further disassemble this product, this guide can help

Image 1/1:
  • Start by powering down the device to remove the battery from the iRobot Roomba 860.

Add Comment

Image 1/2: Locate the battery panel and the 2 - 7 mm Phillips #2 Point Screws. Image 2/2: Using a Phillips #2 Point Screwdriver, remove the screws and use your fingers to pull the cover away from the device.
  • Flip the Roomba over so that the underside is facing up.

  • Locate the battery panel and the 2 - 7 mm Phillips #2 Point Screws.

  • Using a Phillips #2 Point Screwdriver, remove the screws and use your fingers to pull the cover away from the device.

Add Comment

Image 1/2: Pull up on the tabs to easily remove the battery. Image 2/2: Pull up on the tabs to easily remove the battery.
  • Locate the two fabric tabs on the side of the battery.

  • Pull up on the tabs to easily remove the battery.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Murphy

Member since: 03/02/2017

431 Reputation

4 Guides authored

Team

USF Tampa, Team S13-G5, Cagle Spring 2017 Member of USF Tampa, Team S13-G5, Cagle Spring 2017

USFT-CAGLE-S17S13G5

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 16

All Time: 69