iRobot Roomba 805 Filter Replacement
Grady Landers and 2 other contributors
Last updated on Jan 27, 2026
Views: 852
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 16
- Past 30 Days:
- 66
- All Time:
- 852
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will go over how to clean or replace the filter in your iRobot Roomba 805. If you plan on replacing the filter you can get a new one from iRobot. No tools are needed to follow this guide.
What you need
-
-
-
At the back of the Roomba, squeeze the release latch.
-
Firmly pull upwards to remove the filter bay.
Ask FixBot
-
-
-
-
Grab the filter by the pull tag and remove it from the filter bay.
-
Now you can clean the filter and the filter bay or replace the filter with a new one.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team S1-G6, Barthe Fall 2019 Member of UMass Dartmouth, Team S1-G6, Barthe Fall 2019
UMASSD-BARTHE-F19S1G6
3 Members
60 Guides authored
