Fix Your Stuff Community Store

iRobot Roomba 690 Filter Replacement

Introduction

In order to ensure your iRobot Roomba 690 is properly maintained, it is essential that the filter is removed for cleaning to prevent its performance from decreasing or debris damaging other parts of the Roomba. Sometimes the filter will require replacement due to being old or damaged itself. It is recommended that the filters be replaced on a Roomba every 6-12 months and cleaned weekly. No additional tools are needed to perform this task, as it is necessary to do frequently to ensure maximum cleaning performance, though you may need some cleaning items for the filter depending on how much debris it collected.

  1. iRobot Roomba 690 Filter Replacement, Filter: step 1, image 1 of 1

    • Place the Roomba upside down so that the wheels and brushes are facing upward.

    Edit

  2. iRobot Roomba 690 Filter Replacement: step 2, image 1 of 1

    • Press the release button on the top side of the Roomba's filter module.

    • Slide the module out and away from the Roomba.

    Edit

  4. iRobot Roomba 690 Filter Replacement: step 3, image 1 of 1

    • Pull on the yellow tab to open the filter latch.

    Edit

  5. iRobot Roomba 690 Filter Replacement: step 4, image 1 of 2 iRobot Roomba 690 Filter Replacement: step 4, image 2 of 2

    • Slide the filter out of the module.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

John Galvin

Member since: 03/23/22

584 Reputation

5 Guides authored

Badges: 6

+3 more badges

Team

UMass Dartmouth, Team 1-1, Botvin Spring 2022 Member of UMass Dartmouth, Team 1-1, Botvin Spring 2022

UMASSD-BOTVIN-S22S1G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 4

All Time: 214