Introduction

The battery is an essential component to the iRobot Braava 320. Without a functioning battery, your iRobot could have trouble turning on, staying on, or charging. Replacing the battery may solve these issues.

Parts

No parts required.

Image 1/1: The battery cover is located in the center of the device in between both wheels.
  • Flip your device over and locate the battery cover.

    • The battery cover is located in the center of the device in between both wheels.

Add Comment

Image 1/1: The screw does not remove, it stays attached to the cover.
  • Using a Flathead #4 screwdriver, gently turn the 12mm screw that holds the battery cover in.

    • The screw does not remove, it stays attached to the cover.

Add Comment

Image 1/2: To remove the battery, pull it straight up. To disconnect the cable, gently pull it straight out of the connector. Image 2/2: To reinstall the cable, hold it near the end and gently push it in the connector.
  • Gently remove the battery from the tray and disconnect the battery cable.

    • To remove the battery, pull it straight up. To disconnect the cable, gently pull it straight out of the connector.

  • To reinstall the cable, hold it near the end and gently push it in the connector.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

bradley boardwine

Member since: 02/28/2017

201 Reputation

2 Guides authored

Team

USF Tampa, Team S1-G3, Nance Spring 2017 Member of USF Tampa, Team S1-G3, Nance Spring 2017

USFT-NANCE-S17S1G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 10

All Time: 79