Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

prerequisite only

Parts

No parts specified.

  1. Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly. There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.
    • Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.

    • There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Andrew Optimus Goldheart

Member since: 10/17/2009

465,037 Reputation

410 Guides authored

Team

iFixit Member of iFixit

Community

135 Members

13,958 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 323