Fix Your Stuff Community Store

iPod Touch 3rd Generation Power/Volume Controls Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. iPod Touch 3rd Generation Power/Volume Controls Replacement, Power/Volume Controls: step 1, image 1 of 1

    • Remove the two Phillips screws securing the power/volume controls to the rear panel.

    Edit

  3. iPod Touch 3rd Generation Power/Volume Controls Replacement: step 2, image 1 of 1

    • Use the tip of a spudger to remove the yellow kapton tape covering the power/volume control ribbon cable.

    Edit

  4. iPod Touch 3rd Generation Power/Volume Controls Replacement: step 3, image 1 of 1

    • Remove the two Phillips screws securing the power/volume controls to the rear panel.

    • Lift the power/volume controls out of the rear panel.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,640