Fix Your Stuff Community Store

iPod 2nd Generation Rear Panel Replacement

Introduction

The shiny rear half of your iPod case.

What you need

  1. iPod 2nd Generation Rear Panel Replacement, Rear Panel: step 1, image 1 of 1

    • Before opening your iPod, ensure that the hold switch is in the locked position.

  2. iPod 2nd Generation Rear Panel Replacement: step 2, image 1 of 1

    • Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

    • Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you've inserted the tool, run it along the seam to free the five tabs holding the iPod together.

  4. iPod 2nd Generation Rear Panel Replacement: step 3, image 1 of 1

    • Continue to run the opening tool along the side of the case until all five tabs have been released.

  5. iPod 2nd Generation Rear Panel Replacement: step 4, image 1 of 1

    • Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.

  6. iPod 2nd Generation Rear Panel Replacement: step 5, image 1 of 1

    • Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.

  7. iPod 2nd Generation Rear Panel Replacement: step 6, image 1 of 1

    • Lift the rear panel away from the iPod, making sure it doesn't catch on the headphone jack.

Author

with 2 other contributors

iRobot

Member since: 09/24/09

1 Reputation

636 Guides authored

Badges: 36

+33 more badges

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 6,377