Skip to main content

Fix Your Stuff

Right to Repair

Store

  1. To begin with, it will be necessary to remove the pieces of glass from the old broken camera lens.
    • To begin with, it will be necessary to remove the pieces of glass from the old broken camera lens.

  2. Once the glass shards from the camera lens are removed, thoroughly clean the camera bezel (the raised metal part around the camera). Once the glass shards from the camera lens are removed, thoroughly clean the camera bezel (the raised metal part around the camera).
    • Once the glass shards from the camera lens are removed, thoroughly clean the camera bezel (the raised metal part around the camera).

  3. Adhere some double sided tape or two dots of glue on the new iPhone X rear camera cover. Use tweezers to position the glass lens in its housing.
    • Adhere some double sided tape or two dots of glue on the new iPhone X rear camera cover.

    • Use tweezers to position the glass lens in its housing.

  4. Lightly press down on the lens for a few seconds to create a good seal.
    • Lightly press down on the lens for a few seconds to create a good seal.

    • You can test your rear camera to verify the quality of your photos and videos.

Conclusion

Congratulations ! You have repaired your iPhone XS, the lens is replaced, clean it with a microfiber cloth. You can now take photos and film normally.

2 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

cPix

Member since: 06/14/2016

3,128 Reputation

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 10

Past 30 Days: 67

All Time: 521