Introduction
This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.
What you need
-
-
-
Flip device upside-down so the plastic white board is facing the ground.
-
Locate the four feet in the corners of the Balance Board.
-
Unscrew the three 12.7 mm Phillips screws from each foot cover.
Ask FixBot
-
-
-
Remove the gray plastic ring from the actual foot by lifting it up.
-
-
-
-
Repeat steps two and three on the remaining four feet.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 13-8, Forte Fall 2014 Member of Cal Poly, Team 13-8, Forte Fall 2014
CPSU-FORTE-F14S13G8
5 Members
60 Guides authored
2 Guide Comments
I am in need of a foot cover. Where can I find one??
This manual did not help
