Samsung Galaxy Note Upper Display Assembly Bracket Replacement
Sam Goldheart and one other contributor
Last updated on May 7, 2024
Views: 195
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 0
- Past 30 Days:
- 9
- All Time:
- 195
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Prereq to remove the Upper Display Assembly Bracket.
What you need
Tools
-
-
-
Use the flat end of a spudger to disconnect the headphone jack/earpiece speaker assembly cable connector.
Ask FixBot
-
-
-
-
Remove the two 3 mm Phillips #00 screws securing the upper display assembly bracket.
-
-
Tool used on this step:Tweezers$4.99
-
Use a pair of tweezers, or your fingers, to remove the upper display assembly bracket.
-
-
To reassemble your device, follow these instructions in reverse order.
