Introduction
https://www.youtube.com/watch?v=j4DYNkDa...
If your iphone 6s runs out to storage after 2 years of using, you can try to change the flash memory card for 128GB. The procedure is extremely difficult. Professional skill and tools are needed to finish the work.
What you need
Video Instructions
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
15 other people completed this guide.
8 Comments
Can I pay you to get the data off my dead phone?
Aaron Hamrick - Reply
Can I pay you to get data off my dead phone?
Aaron Hamrick - Reply
Where do you get the device to copy and write the flash storage in the way the person in the video does?
Jdwashere - Reply
For those who want to know, look for VipFix, I didn’t search very long so I don’t know if their product good or not, but you will know the name of the machine and could probably found what you want on Google, it’s seem to be called a nand reader, nand programmer or nand reapair kit.
Benoit Verret - Reply
For those who want to change it by DIY, don’t try it without a professional equipment and knowlege in microsoldering. It always will ends in Error! So me2 ;-) and i’m really good in mechanics. The Nand Programmer finaly costs 1000$ above! And a good hotair station the same again. Thats only for people who do bussiness with that! Like “DigitalRefreshMaster”! Finaly there’s my Error to get him new life again ;-)
Mon Strual - Reply