Fix Your Stuff Community Store

iPhone 6 Plus Logic Board Assembly Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prereq only.

What you need

  1. iPhone 6 Plus Logic Board Assembly Replacement, Logic Board Assembly: step 1, image 1 of 1

    • Remove the single 2.8 mm Phillips #00 screw securing the plastic clip to the logic board.

    Edit

  2. iPhone 6 Plus Logic Board Assembly Replacement: step 2, image 1 of 1

    • Remove the single 1.3 mm Phillips #00 screw recessed against the top of the rear case.

    Edit

  4. iPhone 6 Plus Logic Board Assembly Replacement: step 3, image 1 of 2 iPhone 6 Plus Logic Board Assembly Replacement: step 3, image 2 of 2
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Use a pair of tweezers to firmly grasp the plastic clip and remove it from the iPhone.

    Edit

  5. iPhone 6 Plus Logic Board Assembly Replacement: step 4, image 1 of 1

    • Remove the single 1.6 mm Phillips #00 screw securing the antenna clip to the rear case.

    Edit

  6. iPhone 6 Plus Logic Board Assembly Replacement: step 5, image 1 of 2 iPhone 6 Plus Logic Board Assembly Replacement: step 5, image 2 of 2

    • Carefully grasp the antenna clip with a pair of tweezers and remove it from the iPhone.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 10

All Time: 427