Skip to main content

Introduction

Prerequisite to remove the vibrator.

Parts

No parts specified.

  1. Remove the following Phillips #000 screws from the vibrator bracket:
    • Remove the following Phillips #000 screws from the vibrator bracket:

    • One 1.7 mm screw

    • One 2.5 mm screw

  2. With a set of tweezers, remove the vibrator bracket.
    • With a set of tweezers, remove the vibrator bracket.

  3. Remove the 1.7 mm Phillips #000 screw securing the vibrator to the rear case.
    • Remove the 1.7 mm Phillips #000 screw securing the vibrator to the rear case.

  4. Use a set of tweezers to remove the vibrator from the rear case.
    • Use a set of tweezers to remove the vibrator from the rear case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Member since: 10/18/2012

439,879 Reputation

547 Guides authored

Team

iFixit Member of iFixit

Community

138 Members

16,477 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 379