Skip to main content

Introduction

Prerequisite to remove the camera after the logic board.

Parts

No parts specified.

  1. Using a pair of tweezers, flip the rubber camera cover out of its clip and toward the outside of the rear case. Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed. Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed.
    • Using a pair of tweezers, flip the rubber camera cover out of its clip and toward the outside of the rear case.

    • Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed.

  2. Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now

    Android Fix Kits

    A new screen or battery is one kit away.

    Shop Now
  3. Remove the rear-facing camera from the rear case. During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board. If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.
    • Remove the rear-facing camera from the rear case.

    • During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board.

    • If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Sam Goldheart

Member since: 10/18/2012

387,748 Reputation

545 Guides authored

Team

iFixit Member of iFixit

Community

107 Members

9,407 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 1,372