Step 1 Vibrator



• Remove the following screws securing the vibrator bracket and motor to the rear case:
• One 2.3 mm Phillips screw
• One 1.7 mm Phillips screw
• One 1.6 mm Phillips screw in the top of the rear case
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Remove the vibrator bracket and motor from the rear case.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-14682" src="https://www.ifixit.com/Guide/embed/14682/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-14682"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/14682" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview