Introduction

How to remove the SIM card from the 1st Generation iPhone.

Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.
  • Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.

  • Press down on the paper clip until the SIM card tray pops out.

To remove the SIM, insert the end of a SIM eject tool or a small thin paper clip into the hole on the SIM tray. Press firmly and push the tool straight in until the tray pops out.

http://support.apple.com/kb/ht1438

duanekdunn - Reply

I put the SIM card back in, and the slide to unlock does not work.

dean -

Grasp the SIM card tray and slide it out of the iPhone.
  • Grasp the SIM card tray and slide it out of the iPhone.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

30 other people completed this guide.

iRobot

Member since: 09/24/2009

1 Reputation

726 Guides authored

3 Comments

thats what i did too. but it froze..

i dont know what to do..

Marie - Reply

Can't access

hope -

Try with a little strap cut out from a radiology exam sheet. Put it inside the sim tray and try to open again. It works.

Henri Salvat - Reply

Add Comment

View Statistics:

Past 24 Hours: 21

Past 7 Days: 95

Past 30 Days: 357

All Time: 70,488