Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

iPhone 16e Front Camera Assembly Installation

Views: 182

View statistics:

Past 24 Hours:
1
Past 7 Days:
4
Past 30 Days:
8
All Time:
182
Comments: 0

No one has left comments on this guide. Will you be first?

Go to guide comments
Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 0

No one has favorited (and subscribed to) this guide. Will you be the first?

Time Required: No estimate
Difficulty: Moderate
Prerequisite Only

This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

iPhone 16e Front Camera Assembly Installation
    1. iPhone 16e Front Camera Assembly Installation, Place the front camera assembly: step 1, image 1 of 3 iPhone 16e Front Camera Assembly Installation, Place the front camera assembly: step 1, image 2 of 3 iPhone 16e Front Camera Assembly Installation, Place the front camera assembly: step 1, image 3 of 3
      • Slide the front camera assembly into its recess in the frame.

      • Press the assembly down so it lies flat.

      Ask FixBot

      Add Comment

    2. iPhone 16e Front Camera Assembly Installation: step 2, image 1 of 2 iPhone 16e Front Camera Assembly Installation: step 2, image 2 of 2
      • Slide the front camera assembly cable into its slot along the battery.

      Ask FixBot

      Add Comment

    3. iPhone 16e Front Camera Assembly Installation, Reconnect the front camera assembly: step 3, image 1 of 2 iPhone 16e Front Camera Assembly Installation, Reconnect the front camera assembly: step 3, image 2 of 2
      • Use your spudger or your fingers to reconnect the front camera assembly press connectors.

      Ask FixBot

      Add Comment

    4. iPhone 16e Front Camera Assembly Installation, Install the top connector cover: step 4, image 1 of 2 iPhone 16e Front Camera Assembly Installation, Install the top connector cover: step 4, image 2 of 2
      • Place the top connector cover onto the logic board over the three press connectors.

      Ask FixBot

      Add Comment

    5. iPhone 16e Front Camera Assembly Installation, Install the top connector cover screws: step 5, image 1 of 2 iPhone 16e Front Camera Assembly Installation, Install the top connector cover screws: step 5, image 2 of 2
      • Use a tri-point Y000 screwdriver to install the two screws securing the top connector cover:

      • One 1.0 mm‑long screw

      • One 1.3 mm‑long screw

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with

Alex Diaz-Kokaisl

Member since: 01/16/22

252,776 Reputation

1,200 Guides authored

Team

Guide Team Member of Guide Team

Staff

10 Members

62,189 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 8

All Time: 182