Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.
Introduction
Go to step 1 ↓Reassembly steps for the front camera assembly in the iPhone 16 Plus.
What you need
Tools
-
Spudger4.9
-
-
-
Tool used on this step:Dust Blower$5.99
-
Set the front camera assembly into its recess.
-
-
-
-
Use your finger or a spudger to connect the two front camera assembly press connectors, located on the top left corner of the logic board.
-
-
To reassemble your device, follow these instructions in reverse order.