SPC GEAR GK630 Keyboard Switch Replacement
favzed and one other contributor
Last updated on Aug 15, 2024
Views: 1.8K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 34
- Past 30 Days:
- 124
- All Time:
- 1,802
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
Introduction
Go to step 1 ↓Unscrew all screws (there are no screws on the bottom of the keyboard), there should be 13 screws.
What you need
Tools
-
-
-
Unscrew all screws (there are no screws on the bottom of the keyboard), there should be 13 screws.
-
-
-
-
After removing all the screws turn the keyboard upside down and the upper part should fell off, but hold it they are sill connected with black cable, unplug that cable.
-
-
-
Using soldering iron touch its tip to the pin and when it melts press pump on it and push the button. Th pump should suck all the melted solder, if it failed try again
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order of course except soldering part.
