Skip to main content

Free Shipping on Domestic Orders $75+

iPad Pro 13" Preparation

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

What you need

    1. iPad Pro 13" Preparation, Prepare the iPad for disassembly: step 1, image 1 of 2 iPad Pro 13" Preparation, Prepare the iPad for disassembly: step 1, image 2 of 2
      • For your safety, fully discharge the battery before disassembling the device. This reduces the risk of fire if the battery is accidentally damaged during the repair.

      • Disconnect all cables and accessories from the iPad.

      • If your screen is badly cracked, cover it with a layer of packing tape to help the suction cup stick and prevent shards of glass from coming off.

      Ask FixBot

      Add Comment

    2. iPad Pro 13" Preparation: step 2, image 1 of 1
      • Note that directions in this guide are given for the iPad in landscape orientation. The USB-C port is on the right edge of the iPad.

      • Place masking tape over the following areas of the display:

      • The TrueDepth camera near the middle of the top edge

      • The ambient light sensor near the middle of the left edge

      • The bottom edge, where there are delicate ribbon cables under the display

      Ask FixBot

      Add Comment

Finish Line

Cancel: I did not complete this guide.

Nick Schultz

Member since: 03/24/24

65,446 Reputation

343 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 19

All Time: 113