Fix Your Stuff Community Store

iPad Mini CDMA GPS Antenna Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prereq for removing logic board. Battery is out.

What you need

  1. iPad Mini CDMA GPS Antenna Replacement, GPS Antenna: step 1, image 1 of 1

    • Remove the following screws:

    • One 2.5 mm Phillips #00

    • Two 1.1 mm Phillips #00

    • One 1.2 mm Phillips #00

    Edit

  3. iPad Mini CDMA GPS Antenna Replacement: step 2, image 1 of 3 iPad Mini CDMA GPS Antenna Replacement: step 2, image 2 of 3 iPad Mini CDMA GPS Antenna Replacement: step 2, image 3 of 3

    • Use the flat end of a spudger to loosen the foam adhesive holding the antenna to the right speaker.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 6

All Time: 61