Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

Internal prereq.

  1. Disconnect the following connectors from their respective sockets on the logic board:
    • Disconnect the following connectors from their respective sockets on the logic board:

    • Wi-Fi antenna cable

    • Speaker connector cable.

    • Dock connector cable.

    • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 89