Fix Your Stuff Community Store

iPad 2 GSM LCD Replacement

Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Introduction

Moving LCD out of the way to remove random internal components. Internal Prerequisite.

What you need

  1. iPad 2 GSM LCD Replacement, LCD: step 1, image 1 of 1

    • Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.

    Edit

  3. iPad 2 GSM LCD Replacement: step 2, image 1 of 2 iPad 2 GSM LCD Replacement: step 2, image 2 of 2

    • Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.

    • Lay the LCD on the front panel as seen in the second picture.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 722