Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Prerequisite only.

Parts

No parts specified.

  1. Gently pull the fan cable connector straight out of its socket on the logic board. Gently pull the fan cable connector straight out of its socket on the logic board.
    • Gently pull the fan cable connector straight out of its socket on the logic board.

  2. Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.
    • Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.

    • The uppermost screw has a rubber standoff adhered to its head to support the display—leave this in place.

  3. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

Evan Noronha

Member since: 02/05/2015

206,378 Reputation

178 Guides authored

Team

iFixit Member of iFixit

Community

136 Members

16,001 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 62