Fix Your Stuff Community Store

iMac Intel 21.5" EMC 2428 Audio Ports Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prereq only.

What you need

  1. iMac Intel 21.5" EMC 2428 Audio Ports Replacement, Audio Ports: step 1, image 1 of 1

    • Remove the two 5 mm T10 Torx screws securing the audio ports to the outer case.

    Edit

  3. iMac Intel 21.5" EMC 2428 Audio Ports Replacement: step 2, image 1 of 2 iMac Intel 21.5" EMC 2428 Audio Ports Replacement: step 2, image 2 of 2

    • Press both audio ports down slightly, then lift the audio port assembly out of the outer case.

    • A pair of tweezers is helpful to put the ports back in place. First insert the lower tab into the bracket on the outer case, then fasten the screw to secure the jack to the outer case.

    • During reinstallation, it may be helpful to plug in a pair of headphones to each jack before tightening them down completely.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 173