Introduction

Use this guide to replace a dead backup battery or remove it to prevent unwanted alarm beeping.

Before taking apart the iD95, disconnect the AC cord from the wall socket and AC adapter from the DC jack. Remove any iPods, iPhones, and iPads attached to the device.
  • Before taking apart the iD95, disconnect the AC cord from the wall socket and AC adapter from the DC jack. Remove any iPods, iPhones, and iPads attached to the device.

  • Flip over the iD95 so the bottom cover is visible and the LCD screen is facing you.

Add Comment

Remove the 10 mm-length, 5 mm-head screw using a Phillips #1 screwdriver.
  • Remove the 10 mm-length, 5 mm-head screw using a Phillips #1 screwdriver.

Add Comment

Use a plastic opening tool to take out the backup battery.
  • Use a plastic opening tool to take out the backup battery.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Vincent Chan

Member since: 04/18/2013

1 Reputation

6 Guides authored

Team

Cal Poly, Team 12-37, Amido Spring 2013 Member of Cal Poly, Team 12-37, Amido Spring 2013

CPSU-AMIDO-S13S12G37

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 928