On the opposite side of the speaker should be a sticker, remove it with your fingers or the flat plastic iFIxit tool. Use a Philip's screwdriver to take the screws out of the cover.
  • On the opposite side of the speaker should be a sticker, remove it with your fingers or the flat plastic iFIxit tool.

  • Use a Philip's screwdriver to take the screws out of the cover.

Add Comment

Once the screws are all out, the cover should come off revealing the motherboard. Once the screws are all out, the cover should come off revealing the motherboard.
  • Once the screws are all out, the cover should come off revealing the motherboard.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
You will notice that the triangular black volume piece is loose, make sure to take that off revealing the buttons. Once that is done, the motherboard can be taken out. May require some wiggling. Make sure none of the wires are damaged and that they are all connected.
  • You will notice that the triangular black volume piece is loose, make sure to take that off revealing the buttons.

  • Once that is done, the motherboard can be taken out. May require some wiggling.

  • Make sure none of the wires are damaged and that they are all connected.

Add Comment

The connections shown here can be taken off by pulling on the white plastic connector piece.
  • The connections shown here can be taken off by pulling on the white plastic connector piece.

  • The same can be said about the white, paper like, connectors. Pull on them gently.

  • Once all connections are apart, the motherboard is safe to be replaced.

Any insight on where to get a new motherboard for these?

Ben Sanborn - Reply

Would try contacting the company for spare parts.

Reece Ahler - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 136