Introduction

Consider this a meta-guide...that is, a guide that enables other guides. Before you remove any screws, you need to use the right bit, but getting those out of the tightly packed storage area and into your driver can be a chore in itself.

Parts

No parts required.

Image 1/1:
  • Note how challenging it is to remove a required bit from the kit. Argh!

Add Comment

Image 1/1:
  • Find yourself a rubber band...

Add Comment

Image 1/1:
  • Wrap said band around the bit and viola! easy bit extraction enabled. You might want to keep that handy rubber band with the kit now.

Add Comment

Image 1/1:
  • Alternate, no-rubber-band solution: use the tweezers supplied in the bit driver kit.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

32 other people completed this guide.

aaronmiller

Member since: 08/28/2011

1,046 Reputation

2 Guides authored

One Comment

I want to order the 26 bit driver kit technique for removing bits

clement mEnThChEl - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 23

All Time: 2,082