Introduction

This guide demonstrates how to remove and replace the button keys of am iDea USA CT702 in order to preserve the function of the device.

Parts

No parts required.

Image 1/3: Use a plastic opening tool to gently pry open the black panel around the portholes. Image 2/3: Use a plastic opening tool to gently pry open the black panel around the portholes. Image 3/3: Use a plastic opening tool to gently pry open the black panel around the portholes.
  • Place the device face up.

  • Use a plastic opening tool to gently pry open the black panel around the portholes.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Pry the rest of the back off; slowly apply pressure from each side to break each clip connection.

Add Comment

Image 1/2: It is easiest to start with the volume up button key and then work on freeing the next two. Image 2/2: It is easiest to start with the volume up button key and then work on freeing the next two.
  • With a plastic spudger tool, pry the keys away from the black key mat to remove them.

    • It is easiest to start with the volume up button key and then work on freeing the next two.

Add Comment

Image 1/2: The back of each button key has a notch that matches an indent on the black button mat. Match the notches and the indents to properly align the buttons. Image 2/2: To replace the back cover, follow the first three steps in reverse order.
  • Replace the button keys, starting with the outer and ending with the innermost key.

    • The back of each button key has a notch that matches an indent on the black button mat. Match the notches and the indents to properly align the buttons.

  • To replace the back cover, follow the first three steps in reverse order.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Brandt

Member since: 03/11/2015

201 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 67