Installing iBook G4 12" 1.33 GHz Keyboard

Step 1 Battery



• Lay your iBook upside down on a flat surface.
• Use a coin to rotate the battery locking screw 90 degrees clockwise.
• Lift the battery out of the computer.
Step 2 Keyboard



• Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
• If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.
• Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.
Step 3
• Remove the four silver Phillips screws that secure the RAM shield.
Step 4
• Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.
• Make sure that you reconnect the keyboard cable before replacing the RAM shield.

Author

with 3 other contributors

Walter Galan

694,785 Reputation

1,203 Guides authored

Badges: 54

• 
• 
• 

+51 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview