No parts required.
Turn off the computer.
Before each operation it is important to start with the removal of the accumulator.
Take the slide unlocked into position, remove the battery.
Using the screwdriver Philips # 1, unscrew the 5 fixing screws of the cover.
Push the screwdriver a few millimeters under the cover so that it can be touched with your fingers.
Now lift the cover carefully.
Attention! Disconnect the ventillator cable so that the cover can be completely removed (see next step).
Since the ventillator is mounted under the cover, its power supply cable must first be disconnected so that the cover can then be completely removed.
Special thanks to these translators:
irlanda is helping us fix the world! Want to contribute?
Start translating ›
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.