This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Zeppelin Tweeter Repair
Pierre Vanhoorenbeeck and one other contributor
Last updated on Sep 2, 2026
Views: 439
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 17
- Past 30 Days:
- 90
- All Time:
- 439
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide's procedures crystal clear.
Missing Steps
Oops! This guide is currently missing one or more important steps.
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide explains how to diagnose and repair a loss of treble sound in a Zeppelin speaker tweeter, caused by a coil (L102) detached from the printed circuit board.
-
-
-
Just a heads-up: there are small squares on the main board where the tweeter cables are connected. These are small 4-wire coils (dual windings).
-
One of these coils, L102, was detached from the printed circuit board.
-
I desoldered this small component, modified its housing to turn it over on the circuit board, and thus gained a little slack to be able to resolder these 4 very short and thin wires to their respective terminals.
-
Upon reassembly, I got the stereo back in the high frequencies! The second tweeter was functional again.
-
Good luck to you if you are in the same situation I was in.
Ask FixBot
-
-
-
To reassemble your device, follow the instructions in reverse order.
