Introduction

Use this guide to replace the bottom cover of the Zenbre SoundBank Z3.

Parts

No parts required.

Image 1/2: Flip over the device. Image 2/2: Remove the silicon feet by peeling them up.
  • Power off the SoundBank Z3.

  • Flip over the device.

  • Remove the silicon feet by peeling them up.

    • The feet can be reapplied without extra adhesive, but only if you are careful not to let the stick side touch anything.

Add Comment

Image 1/1:
  • Remove the eight 11 mm Philips screws from the bottom of the device.

Add Comment

Image 1/2: Image 2/2:
  • Using a plastic opening tool, remove the bottom panel.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cherian Thomas

Member since: 03/25/2016

334 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 6

All Time: 49