Introduction

Replace the reflective sheet inside of the screen to make images on your tablet clearer.

Remove the back casing by slowly popping each tab out with a plastic opening tool.
  • Remove the back casing by slowly popping each tab out with a plastic opening tool.

Add Comment

Carefully remove the tape one by one from the connecting wires with tweezers.
  • Carefully remove the tape one by one from the connecting wires with tweezers.

Add Comment

Carefully remove the black clips from both sides of the casing with a plastic opening tool.
  • Carefully remove the black clips from both sides of the casing with a plastic opening tool.

  • The clips should pop off separate from the oval attachments.

Add Comment

Carefully remove the oval attachments from the casing.
  • Carefully remove the oval attachments from the casing.

  • Do not tug on the oval attachments because they are connected to fragile wires.

Add Comment

Carefully pull the oval attachments away from the back casing.
  • Carefully pull the oval attachments away from the back casing.

Add Comment

Use a Phillips #000 screwdriver to remove the three screws from the motherboard. Make sure to keep track of the screws. They are needed to reattach the motherboard at the end.
  • Use a Phillips #000 screwdriver to remove the three screws from the motherboard.

  • Make sure to keep track of the screws. They are needed to reattach the motherboard at the end.

Add Comment

Use the plastic opening tool to pull the metal and plastic plates away from the interior of the tablet.  Slowly pop each tab off until the plates are mostly separated from the base.
  • Use the plastic opening tool to pull the metal and plastic plates away from the interior of the tablet. Slowly pop each tab off until the plates are mostly separated from the base.

Add Comment

Separate the white plastic plate from the metal plate by using the plastic opening tool.
  • Separate the white plastic plate from the metal plate by using the plastic opening tool.

  • While these layers are separated, use your tweezers to gently pull the reflective sheet out from in between them.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Colleen McFadden

Member since: 03/11/2015

247 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 4

Past 30 Days: 13

All Time: 573