Introduction

This guide is going to explain how to take the device apart to remove the speaker for eventual replacement.

Parts

No parts required.

Begin by popping off the plastic yellow device casing with the soft tip prying tool. Start by using the wedging the tip of the tool in and working your way around the device to make things easier.
  • Begin by popping off the plastic yellow device casing with the soft tip prying tool.

  • Start by using the wedging the tip of the tool in and working your way around the device to make things easier.

Add Comment

Once the device is opened, the speaker should fall out of its position. Follow the red and black wires attached to the speaker to find the location of connection.
  • Once the device is opened, the speaker should fall out of its position.

  • Follow the red and black wires attached to the speaker to find the location of connection.

Add Comment

The red and black wires are attached by a solder, in order to be replaced this connection must be broken.
  • The red and black wires are attached by a solder, in order to be replaced this connection must be broken.

  • Once the wires are disconnected, the speaker will be successfully removed and ready for replacement.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alexandra Souza

Member since: 10/20/2016

213 Reputation

2 Guides authored

Team

UMass Dartmouth, Team 6-8, Martin Fall 2016 Member of UMass Dartmouth, Team 6-8, Martin Fall 2016

UMASSD-MARTIN-F16S6G8

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 15